Benjamin Obdyke






		Cut slot in roof along hip 3 1/2" wide beginning 3' from peak and running to 3' of end of hip. Start Roll Vent a minimum of 1" from each end of the hip using end cap installation (pg 2). Center ridge cap shingles over vent and use nail line as a placement guide. Install with 2 1/2" nails provided. Nails must penetrate into the sheathing 3/4" or completely through the sheathing. Ridge cap shingles must overhang Roll Vent by 1" each hip end. Run bead of sealant along bottom edge of Roll Vent where it meets shingles on roof deck. Hip application is for Roll Vent Standard (10 1/2") or Roll Vent Metric (11 1/2").